ZyXEL Communications NWA1123-ACv2, User Manual

Page: 132 / 218

Chapter 12 System
NWA1123-ACv2 User’s Guide
132
1
Launch the SSH client and specify the connection information (IP address, port number) for the
NWA.
2
Configure the SSH client to accept connection using SSH version 1.
3
A window displays prompting you to store the host key in you computer. Click Yes to continue.
Figure 81
SSH Example 1: Store Host Key
Enter the password to log in to the NWA. The CLI screen displays next.
12.5.5.2 Example 2: Linux
This section describes how to access the NWA using the OpenSSH client program that comes with
most Linux distributions.
1
Test whether the SSH service is available on the NWA.
Enter “
telnet 192.168.1.2 22
” at a terminal prompt and press
[ENTER]
. The computer
attempts to connect to port 22 on the NWA (using the default IP address of 192.168.1.2).
A message displays indicating the SSH protocol version supported by the NWA.
Figure 82
SSH Example 2: Test
2
Enter “
ssh –1 192.168.1.2
”. This command forces your computer to connect to the NWA using
SSH version 1. If this is the first time you are connecting to the NWA using SSH, a message
displays prompting you to save the host information of the NWA. Type “
yes
” and press
[ENTER]
.
Then enter the password to log in to the NWA.
Figure 83
SSH Example 2: Log in
$ telnet 192.168.1.2 22
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.
SSH-1.5 -1.0.0
$ ssh –1 192.168.1.2
The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.
Administrator@192.168.1.2's password: