ZyXEL Communications NWA1123-ACv2, User Manual

Page: 45 / 218

Chapter 4 Monitor
NWA1123-ACv2 User’s Guide
45
Figure 24
Monitor > Wireless > Detected Device
The following table describes the labels in this screen.
4.8 View Log
Log messages are stored in two separate logs, one for regular log messages and one for debugging
messages. In the regular log, you can look at all the log messages by selecting
All Logs , or you can
select a specific category of log messages (for example, user). You can also look at the debugging
log by selecting
Debug Log . All debugging messages have the same priority.
Table 20
Monitor > Wireless > Detected Device
LABEL DESCRIPTION
Mark as Rogue
AP Click this button to mark the selected AP as a rogue AP. A rogue AP can be contained in the
Configuration > Wireless > MON Mode screen ( Section 6.3 on page 57 ).
Mark as Friendly
AP Click this button to mark the selected AP as a friendly AP. For more on managing friendly
APs, see the
Configuration > Wireless > MON Mode screen ( Section 6.3 on page 57 ).
# This is the detected device’s index number in this list.
Status This indicates the detected device’s status.
Device This indicates the type of device detected.
Role This indicates the detected device’s role (such as friendly or rogue).
MAC Address This indicates the detected device’s MAC address.
SSID Name This indicates the detected device’s SSID.
Channel ID This indicates the detected device’s channel ID.
802.11 Mode This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
Security This indicates the encryption method (if any) used by the detected device.
Description This displays the detected device’s description. For more on managing friendly and rogue
APs, see the
Configuration > Wireless > MON Mode screen ( Section 6.3 on page 57 ).
Last Seen This indicates the last time the device was detected by the NWA.
Refresh Click this to refresh the items displayed on this page.