ZyXEL Communications NWA1123-ACv2, User Manual

Page: 136 / 218

Chapter 12 System
NWA1123-ACv2 User’s Guide
136
collect statistical data and monitor status and performance. You can download the NWA’s MIBs from
www.zyxel.com.
12.8.2 SNMP Traps
The NWA will send traps to the SNMP manager when any one of the following events occurs.
12.8.3 Configuring SNMP
To change your NWA’s SNMP settings, click Configuration > System > SNMP tab. The screen
appears as shown. Use this screen to configure your SNMP settings. You can also configure user
profiles that define allowed SNMPv3 access.
Figure 87
Configuration > System > SNMP
The following table describes the labels in this screen.
Table 62
SNMP Traps
OBJECT LABEL OBJECT ID DESCRIPTION
linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is down.
linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
authenticationFailure 1.3.6.1.6.3.1.1.5.5 This trap is sent when an SNMP request comes from non-
authenticated hosts.
Table 63
Configuration > System > SNMP
LABEL DESCRIPTION
Enable Select the check box to allow or disallow users to access the NWA using SNMP.
Server Port You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.