ZyXEL Communications NWA-3166 User Manual Download Page 28

Page: 28 / 332

Chapter 1 Introduction

NWA-3166 User’s Guide

WLAN

Green

The wireless LAN is active.

Blinking

The wireless LAN is active, and transmitting or
receiving data.

Off

The wireless LAN is not active.

ETHERNET

Green

The NWA has a 10 Mbps Ethernet connection.

Blinking

The NWA has a 10 Mbps Ethernet connection
and is sending or receiving data.

Yellow

The NWA has a 100 Mbps Ethernet connection.

Blinking

The NWA has a 100 Mbps Ethernet connection
and is sending/receiving data.

Off

The NWA does not have an Ethernet connection.

POWER/SYS

Green

The NWA is receiving power and functioning
properly.

Off

The NWA is not receiving power.

Red

Blinking

Either

• If the LED blinks during the boot up process,

the system is starting up.

• If the LED blinks after the boot up process,

the system has failed.

Off

The NWA successfully boots up.

Table 1

LEDs (continued)

LABEL

COLOR

STATUS

DESCRIPTION

Summary of Contents for NWA-3166













































































































































































































































































































































Search results

Summary of Contents for NWA-3166

Reviews:

Related manuals for NWA-3166

Brands by name

Popular brands

ZyXEL Communications NWA-3166, User Manual

Search results

Summary of Contents for NWA-3166

Reviews:

Related manuals for NWA-3166

Brands by name

Popular brands