manualshive.com logo in svg

ZyXEL Communications NBG-418N v2, User Manual, Page: 94 / 228

Share
Download
ZyXEL Communications NBG-418N v2 User Manual Download Page 94

Chapter 8 LAN

NBG-418N v2 User’s Guide

94

important because without it, you must know the IP address of a computer before you can access 
it. 

The NBG-418N v2 can get the DNS server addresses in the following ways.

1

The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you 
sign up. If your ISP gives you DNS server addresses, enter them in the 

DNS Server

 fields in the 

Wizard 

and/or 

WAN

 

> Internet Connection

 screen.

2

If the ISP did not give you DNS server information, leave the 

DNS Server

 fields set to 

0.0.0.0 

in 

the 

Wizard 

screen and/or set to 

From ISP

 in the

 WAN

 

> Internet Connection

 screen for the 

ISP to dynamically assign the DNS server IP addresses.

8.2.3  IP Pool Setup

The NBG-418N v2 is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to 
192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG-418N v2 itself) in the 
lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for 
mail, FTP, TFTP, web, etc., that you may have.

8.2.4  LAN TCP/IP 

The NBG-418N v2 has built-in DHCP server capability that assigns IP addresses and DNS servers to 
systems that support DHCP client capability.

8.3  LAN IP Screen

Use this screen to change your basic LAN settings. Click 

Network

 > 

LAN

.

Figure 66   

Network > LAN > IP 

The following table describes the labels in this screen.

Table 38   

Network > LAN > IP

LABEL

DESCRIPTION

IP Address

Type the IP address of your NBG-418N v2 in dotted decimal notation 192.168.1.1 
(factory default).

Summary of Contents for NBG-418N v2





































































































































































































































Reviews:

No comments