Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
26
Figure 13
Wizard Step 2: Wireless LAN
The following table describes the labels in this screen.
Table 6
Wizard Step 2: Wireless LAN
LABEL
DESCRIPTION
Wireless LAN
Disable the
wireless radio
Click this check box to disable the WLAN in the NBG-418N v2.
SSID
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG-418N v2, make sure all wireless stations use the same
SSID in order to access the network.
Channel
The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a
channel.
Set the operating frequency/channel depending on your particular region. Select a channel
from the drop-down list box. The options vary depending on the frequency band and the
country you are in.
Mode
Select the IEEE 802.11 WLAN mode you wish to use on the NBG-418N v2 from the drop-
down list.
Channel Width
Select the channel bandwidth you want to use for your wireless network.
Select
Auto 20/40 MHz
to allow theNBG-418N v2 to adjust the channel bandwidth to 40
MHz or 20 MHz depending on network conditions.
Select
20 MHz
if you want to lessen radio interference with other wireless devices in your
neighborhood.
Wireless Security
Disable Security Click this check box to disable security settings for the WLAN.
Summary of Contents for NBG-418N v2
Page 10: ...10 PART I User s Guide ...
Page 11: ...11 ...
Page 58: ...58 PART II Technical Reference ...
Page 59: ...59 ...