ZyXEL Communications NBG-418N v2 Page 31 User Manual Download

Page: 31 / 228

Chapter 4 Modes

NBG-418N v2 User’s Guide

A pop-up window appears providing information on this mode. Click

in the pop-up message

window. Click

Apply

Note: Wait while the NBG-418N v2 restarts, then log in to the Web Configurator again.

The NBG-418N v2 IP address is now 192.168.1.1.

4.2.1 Status Screen (Router Mode)

The screen below shows the status screen in

Router

mode.

Figure 20

Status Screen (Router Mode)

The following table describes the icons shown in the

Status

screen.

Table 7

Status Screen Icon Key

ICON

DESCRIPTION

Click this icon to open the setup wizard.

Click this icon to view copyright and a link for related product information.

Click this icon at any time to exit the Web Configurator.

Summary of Contents for NBG-418N v2





































































































































































































































Search results

Summary of Contents for NBG-418N v2

Reviews:

Related manuals for NBG-418N v2

Brands by name

Popular brands

ZyXEL Communications NBG-418N v2, User Manual

Search results

Summary of Contents for NBG-418N v2

Reviews:

Related manuals for NBG-418N v2

Brands by name

Popular brands