ZyXEL Communications MES-2110, User Manual

Page: 86 / 184

Chapter 11 VLAN
MES-2110 User’s Guide
86
This screen is available only when you select Port-Based in the VLAN Type
screen. Click Configuration > VLAN Menu > Port-Based to open the following
screen.
Figure 39 Configuration > VLAN Menu > Port-Based
The following table describes the labels in this screen.
Table 29 Configuration > VLAN Menu > Port-Based
LABEL DESCRIPTION
Port-Based VLAN Configuration
Port Number
Use this to select the port you are configuring.
Port1-10 Select the subscriber ports that can talk to each other.
Switch Management Use this to enable or disable switch management via the web
configurator, Telnet or SNMP manager. Select the port through
which you can manage the Switch. If you disable this feature,
then you cannot access the web configurator from a computer
connected to this port.
Apply Click this to save your changes.
Port-Based VLAN Status
Port Number
This is the port number.
Port1-10 This shows the subscriber ports that can talk to each other.
Switch Management This shows whether switch management is enabled or disabled.