background image

Appendix B Common Services

MES-2110 User’s Guide

176

SQL-NET

TCP

1521

Structured Query Language is an 
interface to access data on many 
different types of database systems, 
including mainframes, midrange 
systems, UNIX systems and network 
servers.

SSH

TCP/UDP

22

Secure Shell Remote Login Program.

STRM WORKS

UDP

1558

Stream Works Protocol.

SYSLOG

UDP

514

Syslog allows you to send system logs 
to a UNIX server.

TACACS

UDP

49

Login Host Protocol used for (Terminal 
Access Controller Access Control 
System).

TELNET

TCP

23

Telnet is the login and terminal 
emulation protocol common on the 
Internet and in UNIX environments. It 
operates over TCP/IP networks. Its 
primary function is to allow users to 
log into remote host systems.

TFTP

UDP

69

Trivial File Transfer Protocol is an 
Internet file transfer protocol similar 
to FTP, but uses the UDP (User 
Datagram Protocol) rather than TCP 
(Transmission Control Protocol).

VDOLIVE

TCP

7000

Another videoconferencing solution.

Table 74   

Commonly Used Services (continued)

NAME

PROTOCOL

PORT(S)

DESCRIPTION

Summary of Contents for MES-2110

























































































































































































Reviews: