ZyXEL Communications MES-2110, User Manual

Page: 137 / 184

Chapter 19 QoS
MES-2110 User’s Guide
137
Priority Mode Select a priority mode for the port.
802.1p Priority uses port priority as queuing basis. Assign a
priority level to each port in the 802.1p Priority screen ( Section
19.3 on page 138 ).
Tag Priority uses VLAN tag priority as queuing basis. See
Section 19.4 on page 139 for more details on configuring tag
priority.
IP ToS Priority uses IP DSCP priority as queuing basis. See
Section 19.5 on page 139 for more details on configuring IP DSCP
priority.
IP & Tag Priority uses both IP DSCP priority and tag priority as
queuing basis.
IP Over Tag Use this to enable or disable IP Over Tag on the port.
When you enable this feature and the Switch receives a frame
containing both IP DSCP and tag priority information, the Switch
will only use the IP DSCP priority information.
All Port Use this to set the priority mode for all ports.
Undo Click this to load your last saved settings.
Apply Click this to save your changes.
QoS Base Status
Port1-10
This is the port number.
Schedule This is the schedule mode used on the Switch.
Priority Mode This is the priority mode used on the port.
IP Over Tag This shows whether the IP over tag feature is enabled or disabled
on the Switch.
Table 57 Configuration > QoS Menu > Base Configuration
LABEL DESCRIPTION