ZyXEL Communications MES-2110, User Manual

Page: 43 / 184

Chapter 4 The Web Configurator
MES-2110 User’s Guide
43
Bandwidth
Control
This link takes you to a screen where you can configure bandwidth limits
on the Switch.
Storm
Control
This link takes you to a screen to set up broadcast filters.
Port
Mirroring
This link takes you to a screen where you can copy traffic from one port
or ports to another port in order that you can examine the traffic from
the first port without interference.
Trunk
Config
This link takes you to screens where you can logically aggregate physical
links to form one logical, higher-bandwidth link.
IGMP Menu This link takes you to screens where you can configure various multicast
features, IGMP snooping and create multicast VLANs.
DHCP
Snooping
This link takes you to screens where you can configure filtering of
unauthorized DHCP frames in your network.
ARP
Inspection
This link takes you to a screen where you can configure filtering of
unauthorized Address Resolution Protocol (ARP) frames in your network.
MAC Menu This link takes you to screens where you can configure the following
settings:
• configure IEEE 802.1x port authentication as well as MAC
authentication for clients communicating via the Switch,
• activate MAC address learning and set the maximum number of MAC
addresses to learn on a port,
• view the MAC addresses (and types) of devices attached to what
ports.
QoS Menu This link takes you to screens where you can configure priority levels for
traffic transmitted through each port.
Mgmt Config
Serial Port
Config
This link takes you to a screen where you can configure the parameters
for connections via the console port.
SNMP
Config
This link takes you to screens where you can configure settings for date
and time.
SNTP This link takes you to a screen where you can configure SNTP and date/
time settings.
Email
Alarm &
SYSLog
This link takes you to screens where you can set up system logs and e-
mail the logs to you.
User Config This link takes you to a screen where you can set up administrative and
user accounts for people to use the Switch.
Cable Test This link takes you to a screen where you can test the cable connection
on each port.
Host
Denial-of-
Service
Protection
This link takes you to a screen where you can allow trusted computers to
access the Switch via remote management.
Port
Abnormal
Traffic
Detection
This link takes you to a screen where you can configure the Switch to
detect abnormal traffic transmission and temporarily or permanently
block traffic transmission through a port.
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION