ZyXEL Communications LTE6100 User Manual Download Page 167

Page: 167 / 189

LTE6100 User’s Guide

167

P P E N D I X

Pop-up Windows, JavaScript and Java

Permissions

In order to use the web configurator you need to allow:

• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).

Note: Internet Explorer 6 screens are used here. Screens for other Internet Explorer

versions may vary.

Internet Explorer Pop-up Blockers

You may have to disable pop-up blocking to log into your device.

Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow
pop-up blocking and create an exception for your device’s IP address.

Disable Pop-up Blockers

In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off Pop-up Blocker.

Figure 124

Pop-up Blocker

You can also check if pop-up blocking is disabled in the Pop-up Blocker section in the Privacy tab.

In Internet Explorer, select Tools, Internet Options, Privacy.

Summary of Contents for LTE6100






























































































































































































Search results

Summary of Contents for LTE6100

Reviews:

Related manuals for LTE6100

Brands by name

Popular brands

ZyXEL Communications LTE6100, User Manual

Search results

Summary of Contents for LTE6100

Reviews:

Related manuals for LTE6100

Brands by name

Popular brands