ZyXEL Communications G-570S, User Manual

Page: 82 / 154

Chapter 7 Wireless Screens
ZyXEL G-570S User’s Guide
82
Figure 41 OTIST
The following table describes the labels in this screen.
7.9.1.2 Wireless Client
Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the
same Setup Key as your AP’s and click Save .
Figure 42 Example Wireless Client OTIST Screen
7.9.1.3 ZyXEL Device in Wireless Client Mode
If you are using the ZyXEL Device in Wireless Client mode, you can enable OTIST using
either the OTIST button or the web configurator.
Table 25 OTIST
LABEL DESCRIPTION
One-Touch Intelligent Security Technology
Setup Key Enter the setup key of up to eight printable characters. The default OTIST setup
key is "01234567".
Note: If you change the OTIST setup key here, you must also make
the same change on the wireless client(s).
Yes! To have OTIST automatically generate a WPA-PSK key, select this check box. If
you manually configured a WEP key or a WPA-PSK key and you also select this
check box, then the key you manually configured is used.
Start Click Start to encrypt the wireless security data using the setup key and have the
device set the wireless client to use the same wireless settings as the device. You
must also activate and start OTIST on the wireless client at the same time.
The process takes three minutes to complete.