Chapter 7 Wireless
EMG6726/8726-B10A User’s Guide
88
3
3 Press the
WPS
button for more than five seconds on the EMG.
Or
Click
Add Extender
in the Multy Pro App. Install from Google Play or the Apple App store.
The following figure shows the Multy Pro application. Device Z is the EMG. Device A is a Multy-
Prosupported extender in AP mode. Devices B and C are Multy-Pro-supported extenders in repeater
Mode.
Figure 37
MESH Application
Click
Network > Wireless > MESH
. The following screen displays.
Figure 38
Network Setting > Wireless > MESH
The following table describes the labels in this screen.
Table 21 Network Setting > Wireless > MESH
LABEL
DESCRIPTION
MESH
Select
Enable
to activate MESH and have the EMG apply the wireless name, password, and
security type of the main 2.4G wireless network to the main 5G wireless network. A warning
displays when you select
Enable
(see
.
Note: When MESH is enabled, the following settings become not configurable:
• The
Keep 2.4G and 5G WiFi network name the same
setting in the
Network Setting > Wireless
> WiFi
and
Network Setting > Wireless > WiFi > Edit
screens.
• The
WPS
setting in the
Network Setting > Wireless > Advanced
screen.
• The
ONE Connect
setting in the
Network Setting > Home Connectivity
screen.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.