Chapter 18 MAC Filter
EMG6726/8726-B10A User’s Guide
194
The following table describes the labels in this screen.
Table 79 Security > MAC Filter
LABEL
DESCRIPTION
MAC Address Filter
Select
Enable
to activate the MAC filter function.
MAC Restrict Mode
Select
Allow
to only permit the listed MAC addresses access to the EMG. Select
Deny
to
permit anyone access to the EMG except the listed MAC addresses.
Set
This is the index number of the MAC address.
Active
Select
Active
to enable the MAC filter rule. The rule will not be applied if
Active
is not
selected.
Host Name
Enter the host name of the wireless or LAN clients that are allowed access to the EMG.
MAC Address
Enter the MAC addresses of the wireless or LAN clients that are allowed access to the EMG in
these address fields. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.