Chapter 7 Wireless
EMG6726/8726-B10A User’s Guide
82
7.4 The WPS Screen
Use this screen to use the WiFi Protected Setup (WPS) function on your EMG.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Set up each WPS connection between two devices. Both devices must
support WPS. See
for more information about WPS.
Note: The EMG applies the security settings of the main 2.4G or 5G wireless profile (see
). If you want to use the WPS feature, make sure you have enabled
WPS
in the
Network Setting
>
Wireless
>
Advanced
screen.
Click
Network Setting
>
Wireless
>
WPS
. The following screen displays.
Figure 34
Network Setting > Wireless > WPS
The following table describes the labels in this screen.
7.5 The Advanced Screen
Use this screen to configure advanced wireless settings. Click
Network Setting > Wireless > Advanced
.
The screen appears as shown.
See
for detailed definitions of the terms listed in this screen.
Table 18 Network Setting > Wireless > WPS
LABEL
DESCRIPTION
Connection Type
This field indicates whether you will apply WPS to the 2.4G or 5G wireless network.
Wi-Fi Name
This field displays the wireless network name.
WPS
Click the
Connect
button to add another WPS-enabled wireless device (within wireless range of
the EMG) to the wireless network. This button may either be a physical button on the outside of
device, or a menu button similar to the
WPS
button on this screen.
Note: You must press the other wireless device’s WPS button within two minutes of
pressing this button.