Chapter 12 Dynamic DNS Setup
EMG6726/8726-B10A User’s Guide
172
The following table describes the labels in this screen.
12.3 The Dynamic DNS Screen
Use this screen to change your EMG’s DDNS. Click
Network Setting > DNS > Dynamic DNS
. The screen
appears as shown.
Figure 109
Network Setting > DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 65 DNS Entry: Add/Edit
LABEL
DESCRIPTION
Host Name
Enter the host name of the DNS entry.
IPv4 Address
Enter the IPv4 address of the DNS entry.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 66 Network Setting > DNS > > Dynamic DNS
LABEL
DESCRIPTION
Dynamic DNS Setup
Dynamic DNS
Select
Enable
to use dynamic DNS.
Service Provider
Select your Dynamic DNS service provider from the drop-down list box. If it’s not in the
drop-down list, please select
DNS user defined
. Fill in the
Connection Type
and
URL Update
fields.
Connection Type
Select a protocol that your Dynamic DNS service server use.
URL Update
Enter an URL of the Dynamic DNS provider.
Host/Domain
Name
Type the domain name assigned to your EMG by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Username
Type your user name.
Password
Type the password assigned to you.