manualshive.com logo in svg

ZyXEL Communications EMG6726-B10A, User Manual, Page: 20 / 323

Share
Download
ZyXEL Communications EMG6726-B10A User Manual Download Page 20

Chapter 1 Introducing the EMG

EMG6726/8726-B10A User’s Guide

20

• Web Configurator. This is recommended for everyday management of the EMG using a (supported) 

web browser.

1.3  Good Habits for Managing the EMG

Do the following things regularly to make the EMG more secure and to manage the EMG more 
effectively.

• Change the password. Use a password that’s not easy to guess and that consists of different types of 

characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier working 

configuration may be useful if the device becomes unstable or even crashes. If you forget your 

password, you will have to reset the EMG to its factory default settings. If you backed up an earlier 

configuration file, you would not have to totally re-configure the EMG. You could simply restore your 

last configuration.

1.4  Hardware

1.4.1  Front Panel

The following graphic displays the front panel of the EMG.

Figure 5   

LEDs on the EMG6726-B10A

Summary of Contents for EMG6726-B10A




































































































































































































































































































































Reviews:

No comments