Chapter 37 Diagnostic
EMG6726/8726-B10A User’s Guide
273
Auto Event
Select
Enable
for the EMG to detect link status and send a notification when an error
(such as errors in symbol, frames, or seconds) is detected. Otherwise, click
Disable
and you will not be notified.
Features
Select
Variable Retrieval
so the EMG can respond to requests for information, such
as requests for Ethernet counters and statistics, about link events.
Select
Link Events
so the EMG can interpret link events, such as link fault and dying
asp.Link events are set in event notification PDUs (Protocol Data Units), and indicate
when the number of errors in a certain given interval (time, number of frames,
number of symbols, or number of errored frame seconds) exceeds a specified
threshold. Organizations may create organization-specific link event TLVs as well.
Select
Remote Loopback
so the EMG can accept loopback control PDUs to convert
EMG into loopback mode.
Select
Active Mode
so the EMG initiates OAM discovery, send information PDUs; and
may send event notification PDUs, variable request/response PDUs, or loopback
control PDUs.
Apply
Click this button to save your changes.
Table 131 Maintenance > Diagnostics > 802.3ah
LABEL
DESCRIPTION