ZyXEL Communications Dimension GS-3012F, User Manual

Page: 199 / 235

Dimension GS-3012F Gigabit Ethernet Switch
Command Examples 29-3
Figure 29-4 show logging Command Example
If you clear a log (by entering
y
at the “
Clear Error Log (y/n):
” prompt), you cannot view it
again.
29.2.5 show interface
Syntax:
show interface [port-number]
This command displays statistics of a port. The following example shows that port 10 is up and the related
information.
Figure 29-5 show interface Command Example
GS-3012F# show interface 10
Port Info Port NO. :10
Link :100M/F
Statuss :FORWARDING
LACP :Disabled
TxPkts :69
RxPkts :4
Errors :0
Tx KBs/s :1.684
Rx KBs/s :1.684
Up Time : 0:02:12
TX Packet Tx Packets :69
Multicast :0
Broadcast :0
Pause :0
Tagged :0
RX Packet Tx Packets :4
Multicast :0
Broadcast :4
Pause :0
Control :0
TX Collison Single :0
Multiple :0
Excessive :0
Late :0
Error Packet RX CRC :0
Length :0
Runt :0
Distribution 64 :4
65 to 127 :74
128 to 255 :18
256 to 511 :0
512 to 1023 :0
1024 to 1518 :44
Giant :0
GS-3012F#
GS-3012F# show logging
50 Thu Jan 1 00:01:54 1970 PP05 -WARN SNMP TRAP 3: link up
51 Thu Jan 1 00:03:04 1970 PINI -WARN SNMP TRAP 0: cold start
52 Thu Jan 1 00:03:04 1970 PP0e -WARN SNMP TRAP 24: Event On Trap
53 Thu Jan 1 00:03:04 1970 PINI INFO main: init completed
54 Thu Jan 1 00:00:02 1970 PINI -WARN SNMP TRAP 0: cold start
55 Thu Jan 1 00:00:02 1970 PP0e -WARN SNMP TRAP 24: Event On Trap
56 Thu Jan 1 00:00:02 1970 PINI INFO main: init completed
57 Thu Jan 1 00:00:02 1970 PINI -WARN SNMP TRAP 0: cold start
58 Thu Jan 1 00:00:02 1970 PP0e -WARN SNMP TRAP 24: Event On Trap
59 Thu Jan 1 00:00:02 1970 PINI INFO main: init completed
Clear Error Log (y/n):