Chapter 19 Parental Control
EX5501-B0 / AX7501-B0 / PX7501-B0 User’s Guide
223
Figure 138
Security > Parental Control > Add/Edit PCP (Network Service & Site/URL Keyword)
The following table describes the fields in this screen.
Table 88
Security > Parental Control >Add/Edit PCP
LABEL
DESCRIPTION
General
Active
Select
Enable
or
Disable
to activate or deactivate the parental control rule.
Parental Control
Profile Name
Enter a descriptive name for the rule.
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you select
Custom
, enter the LAN user’s MAC address. If you select
All
, the rule applies to all LAN users.
Rule List
In
Home Network User
, select
Custom
, enter the LAN user’s MAC address, then click the
Add
icon to enter a computer MAC address for this PCP. Up to five are allowed. Click the
Delete
icon
to remove one.
Internet Access Schedule
Day
Select check boxes for the days that you want the Zyxel Device to perform parental control.
Time
Drag the time bar to define the time that the LAN user is allowed access (
Authorized access
) or
denied access (
No access
).
Add New
Service
Click this to add a new time bar. Up to three are allowed.
Network Service
Network Service
Setting
If you select
Block
, the Zyxel Device prohibits the users from viewing the web sites with the URLs
listed below.
If you select
Allow
, the Zyxel Device blocks access to all URLs except ones listed below.
Add New
Service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name
,
Protocol
, and
Port
of the new rule, as shown in
.
#
This shows the index number of the rule.
