manualshive.com logo in svg

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 592 / 686

Share
Download
ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 592

Chapter 42 System Maintenance Menus 8 to 10

ZyWALL 2 Plus User’s Guide

592

Figure 419   

Menu 24.10 System Maintenance: Time and Date Setting

The following table describes the fields in this screen.

       Menu 24.10 - System Maintenance - Time and Date Setting

Time Protocol= NTP (RFC-1305)
Time Server Address= a.ntp.alphazed.net

Current Time:                         09 : 24 : 26
New Time (hh:mm:ss):                  N/A  N/A  N/A

Current Date:                         2007 - 03 - 07
New Date (yyyy-mm-dd):                N/A    N/A  N/A

Time Zone= GMT

Daylight Saving= No
Start Date (mm-nth-week-hr):          Jan. - 1st  - Sun. -  00
End Date (mm-nth-week-hr):            Jan. - 1st  - Sun. -  00

  Press ENTER to Confirm or ESC to Cancel:

Table 218   

Menu 24.10 System Maintenance: Time and Date Setting

FIELD

DESCRIPTION

Time Protocol

Enter the time service protocol that your timeserver uses. Not all time servers 

support all protocols, so you may have to check with your ISP/network 

administrator or use trial and error to find a protocol that works. The main 

differences between them are the format. 

Daytime (RFC 867)

 format is day/month/year/time zone of the server.

Time (RFC-868)

 format displays a 4-byte integer giving the total number of 

seconds since 1970/1/1 at 0:0:0.
The default,

 NTP (RFC-1305)

, is similar to 

Time (RFC-868)

.

Select 

Manual

 to enter the new time and new date manually.

Time Server 

Address

Enter the IP address or domain name of your timeserver. Check with your ISP/

network administrator if you are unsure of this information. 

Current Time

This field displays an updated time only when you reenter this menu.

New Time

Enter the new time in hour, minute and second format. This field is available when 

you select 

Manual

 in the 

Time Protocol

 field.

Current Date

This field displays an updated date only when you reenter this menu.

New Date

Enter the new date in year, month and day format. This field is available when you 

select 

Manual

 in the 

Time Protocol

 field.

Time Zone

Press [SPACE BAR] and then [ENTER] to set the time difference between your 

time zone and Greenwich Mean Time (GMT). 

Daylight Saving

Daylight Saving Time is a period from late spring to early fall when many countries 

set their clocks ahead of normal local time by one hour to give more daylight time in 

the evenings. If you use daylight savings time, then choose 

Yes

.

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments