ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 431

Page: 431 / 686

Chapter 25 Logs Screens

ZyWALL 2 Plus User’s Guide

431

Time initialized by NTP
server

The router got the time and date from the NTP server.

Connect to Daytime server
fail

The router was not able to connect to the Daytime server.

Connect to Time server fail

The router was not able to connect to the Time server.

Connect to NTP server fail

The router was not able to connect to the NTP server.

Too large ICMP packet has
been dropped

The router dropped an ICMP packet that was too large.

SMT Session Begin

An SMT management session has started.

SMT Session End

An SMT management session has ended.

Configuration Change: PC =
0x%x, Task ID = 0x%x

The router is saving configuration changes.

Successful SSH login

Someone has logged on to the router’s SSH server.

SSH login failed

Someone has failed to log on to the router’s SSH server.

Successful HTTPS login

Someone has logged on to the router's web configurator

interface using HTTPS protocol.

HTTPS login failed

Someone has failed to log on to the router's web configurator

interface using HTTPS protocol.

DNS server %s was not
responding to last 32
consecutive queries…

The specified DNS server did not respond to the last 32

consecutive queries.

DDNS update IP:%s (host %d)
successfully

The device updated the IP address of the specified DDNS

host name.

SMTP successfully

The device sent an e-mail.

myZyXEL.com registration
successful

Registration of the device with myZyXEL.com was

successful.

Trial service registration
successful

Registration for a trial service was successful.

Service upgrade successful

Registration for a service upgrade was successful.

Service refresh successful.

The device successfully refreshed service information from

myZyXEL.com.

Content Filter trial service
activation successfully

The content filtering trial service was successfully activated

for this device.

The myZyXEL.com service registration failed due to the error

listed. If you are unable to register for services at

myZYXEL.com, the error message displayed in this log may

be useful when contacting customer support.

Table 140

System Maintenance Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews:

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 431 / 686

Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews: