ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 372

Page: 372 / 686

Chapter 20 DNS

ZyWALL 2 Plus User’s Guide

372

The following table describes the labels in this screen.

20.9 Configuring DNS DHCP

Click

ADVANCED

DNS

DHCP

to open the

DNS

DHCP

screen shown next. Use this

screen to configure the DNS server information that the ZyWALL sends to its LAN, DMZ or
WLAN DHCP clients.

Table 117

ADVANCED > DNS > Cache

LABEL

DESCRIPTION

DNS Cache Setup

Cache Positive DNS

Resolutions

Select the check box to record the positive DNS resolutions in the cache.

Caching positive DNS resolutions helps speed up the ZyWALL’s processing of

commonly queried domain names and reduces the amount of traffic that the

ZyWALL sends out to the WAN.

Maximum TTL

Type the maximum time to live (TTL) (60 to 3600 seconds). This sets how long

the ZyWALL is to allow a positive resolution entry to remain in the DNS cache

before discarding it.

Cache Negative

DNS Resolutions

Caching negative DNS resolutions helps speed up the ZyWALL’s processing of

commonly queried domain names (for which DNS resolution has failed) and

reduces the amount of traffic that the ZyWALL sends out to the WAN.

Negative Cache

Period

Type the time (60 to 3600 seconds) that the ZyWALL is to allow a negative

resolution entry to remain in the DNS cache before discarding it.

Apply

Click

Apply

to save your changes back to the ZyWALL.

Reset

Click

Reset

to begin configuring this screen afresh.

DNS Cache Entry

Flush

Click this button to clear the cache manually. After you flush the cache, the

ZyWALL must query the DNS servers again for any domain names that had

been previously resolved.

Refresh

Click this button to reload the cache.

This is the index number of a record.

Cache Type

This displays whether the response for the DNS request is positive or negative.

Domain Name

This is the domain name of a host.

IP Address

This is the (resolved) IP address of a host. This field displays

0.0.0.0

for

negative DNS resolution entries.

Remaining Time

(sec)

This is the number of seconds left before the DNS resolution entry is discarded

from the cache.

Modify

Click the delete icon to remove the DNS resolution entry from the cache.

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews:

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 372 / 686

Search results

Summary of Contents for ADSL 2+ Security Gateway

Reviews: