manualshive.com logo in svg

ZyXEL Communications ADSL 2+ Security Gateway, User Manual, Page: 432 / 686

Share
Download
ZyXEL Communications ADSL 2+ Security Gateway User Manual Download Page 432

Chapter 25 Logs Screens

ZyWALL 2 Plus User’s Guide

432

 

Table 141   

System Error Logs

LOG MESSAGE

DESCRIPTION

%s exceeds the max. 
number of session per 
host!

This attempt to create a NAT session exceeds the maximum 

number of NAT session table entries allowed to be created per 

host.

setNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter 

settings.

readNetBIOSFilter: calloc 
error

The router failed to allocate memory for the NetBIOS filter 

settings.

WAN connection is down.

A WAN connection is down. You cannot access the network 

through this interface.

Dial Backup starts

Dial backup started working.

Dial Backup ends

Dial backup stopped working.

DHCP Server cannot assign 
the static IP %S (out of 
range).

The LAN subnet, LAN alias 1, or LAN alias 2 was changed and 

the specified static DHCP IP addresses are no longer valid.

The DHCP static IP %s is 
conflict.

The static DHCP IP address conflicts with another host.

SMTP fail (%s)

The device failed to send an e-mail (error message included).

SMTP authentication fail 
(%s)

The device failed to authenticate with the SMTP server (error 

message included).

Table 142   

Access Control Logs

LOG MESSAGE

DESCRIPTION

Firewall default policy: [ TCP | 
UDP | IGMP | ESP | GRE | OSPF ] 
<Packet Direction>

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access 

matched the default policy and was blocked or forwarded 

according to the default policy’s setting.

Firewall rule [NOT] match:[ TCP 
| UDP | IGMP | ESP | GRE | OSPF 
] <Packet Direction>, <rule:%d>

Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access 

matched (or did not match) a configured firewall rule 

(denoted by its number) and was blocked or forwarded 

according to the rule. 

Triangle route packet forwarded: 
[ TCP | UDP | IGMP | ESP | GRE | 
OSPF ]

The firewall allowed a triangle route session to pass 

through.

Packet without a NAT table entry 
blocked: [ TCP | UDP | IGMP | 
ESP | GRE | OSPF ]

The router blocked a packet that didn't have a 

corresponding NAT table entry.

Router sent blocked web site 
message: TCP

The router sent a message to notify a user that the router 

blocked access to a web site that the user requested.

Exceed maximum sessions per host 
(%d).

The device blocked a session because the host's 

connections exceeded the maximum sessions per host.

Firewall allowed a packet that 
matched a NAT session: [ TCP | 
UDP ]

A packet from the WAN (TCP or UDP) matched a cone 

NAT session and the device forwarded it to the LAN.

Summary of Contents for ADSL 2+ Security Gateway















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments