ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx User Manual Download Page 38

Page: 38 / 402

Chapter 1 Introducing the P-660HWP-Dx

P-660HWP-Dx User’s Guide

Figure 3

Front Panel

The following table describes the LEDs.

1.5 Hardware Connections

Refer to the Quick Start Guide for information on hardware connections.

Table 2

Front Panel LEDs

LED

COLOR STATUS DESCRIPTION

POWER

Green

The P-660HWP-Dx is receiving power and functioning

properly.

Blinking The P-660HWP-Dx is rebooting or performing diagnostics.

Red

Power to the P-660HWP-Dx is too low.

Off

The system is receiving power but has malfunctioned.

ETHERNET

Green

The P-660HWP-Dx has a successful Ethernet connection.

Blinking The P-660HWP-Dx is sending/receiving data.

Off

The LAN is not connected.

WLAN

Green

The P-660HWP-Dx is ready, but is not sending/receiving data

through the wireless LAN.

Blinking

The P-660HWP-Dx is sending/receiving data through the

wireless LAN.

Off

The wireless LAN is not ready or has failed.

DSL

Green

The DSL line is up.

Blinking

The P-660HWP-Dx is initializing the DSL line.

Off

The DSL line is down.

INTERNET

Green

The Internet connection is up but there is no traffic.

Blinking

The P-660HWP-Dx transmitting data on the DSL line.

Off

There is no connection.

Red

The P-660HWP-Dx attempted to connect and failed.

POWERLINE Green

The P-660HWP-Dx detects another power line Ethernet

adapter.

Blinking

The P-660HWP-Dx is transmitting data. (When the device is

managing the network, the LED does not blink.)

Off

The P-660HWP-Dx does not detect another power line

Ethernet adapter.

Summary of Contents for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx



















































































































































































































































































































































































































Search results

Summary of Contents for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Reviews:

Related manuals for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Brands by name

Popular brands

ZyXEL Communications 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx, User Manual

Search results

Summary of Contents for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Reviews:

Related manuals for 802.11g HomePlug AV ADSL2+ Gateway P-660HWP-Dx

Brands by name

Popular brands