ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual Download

Page: 475 / 496

P-662H/HW-D Series User’s Guide

Appendix O Log Descriptions

475

Rcvd data <size> too
large! Max size
allowed: <max size>

The router received directory data that was too large (the size is listed)

from the LDAP server whose address and port are recorded in the

Source field. The maximum size of directory data that the router allows

is also recorded.

Cert trusted: <subject
name>

The router has verified the path of the certificate with the listed subject

name.

Due to <reason codes>,
cert not trusted:
<subject name>

Due to the reasons listed, the certificate with the listed subject name

has not passed the path verification. The recorded reason codes are

only approximate reasons for not trusting the certificate. Please see

Table 194 on page 475

for the corresponding descriptions of the codes.

Table 194

Certificate Path Verification Failure Reason Codes

CODE

DESCRIPTION

Algorithm mismatch between the certificate and the search constraints.

Key usage mismatch between the certificate and the search constraints.

Certificate was not valid in the time interval.

(Not used)

Certificate is not valid.

Certificate signature was not verified correctly.

Certificate was revoked by a CRL.

Certificate was not added to the cache.

Certificate decoding failed.

Certificate was not found (anywhere).

Certificate chain looped (did not find trusted root).

Certificate contains critical extension that was not handled.

Certificate issuer was not valid (CA specific information missing).

(Not used)

CRL is too old.

CRL is not valid.

CRL signature was not verified correctly.

CRL was not found (anywhere).

CRL was not added to the cache.

CRL decoding failed.

CRL is not currently valid, but in the future.

CRL contains duplicate serial numbers.

Time interval is not continuous.

Time information not available.

Database method failed due to timeout.

Table 193

PKI Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Reviews:

Related manuals for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Brands by name

Popular brands

ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series, User Manual

Search results

Summary of Contents for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Reviews:

Related manuals for 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series

Brands by name

Popular brands