z
KNX-DALI-Gateway
tunable white
i
KNX-DALI-Gateway
wit moduleerbaar
TYA670W
6LE005270A
TYA670W
6LL003327A
Area
Line
Ptcp.
Nb.
Description
Da+ Da-
L
N
TYA670W
Area
Line
Ptcp.
Nb.
1
Keyboard for manual control
2
Push Button and LED indicator for addressing
3
KNX Connection
4
Display of DALI numbers
5
Connection to the network
6
DALI connection.
Operating mode
Control Elements
TYA670W
4
Display of the DALI numbers
-
4
a
DALI Groups (1...32)
-
4
b
Individual participants (1...64)
- bc : If the display shows bc (broadcast
operation), the device is not programmed or set
to master control in the KNX configuration. All
DALI devices are then controlled jointly.
7
Key
: manual control
8
LED
on : Manual mode permanently enabled
9
Key
: Turn on or adjust the light intensity
brighter
A
LED
on : Individual participant or DALI group
enabled : light intensity 1…100%
Z
Key
: Turn off or adjust the light intensity
darker
E
LED
on : Individual participant or DALI group
disabled: light intensity 0%
R
Key
: Turn off all DALI participants.
Operating mode
Bus mode
controls via push button
Short-term
manual mode
manual control using the
keyboard, automatic return to
bus mode
Permanent
manual mode
manual control exclusively via
the gateway
H
- In manual mode, a bus mode is not possible.
- In the event of a failure of the bus, manual
control is possible.
- After the bus failure and a return to service, the
device operates in bus mode.
- After a power cut and a return to service, the
gateway operates in bus mode.
- Manual mode is disabled by a telegram in current
mode.
Enabling short-term manual mode
The operation of the keyboard is programmed and
is not locked.
- Press the
key briefly (<1 second).
01
is
displayed on the screen, the
LED remains
off or
is displayed on the screen (refer to
bc
). In this
mode, individual control of the participants is not
possible.
Disabling short-term manual mode
The gateway is in short-term manual mode.
- No manipulation for 5 seconds
or
- Short press on the
key (<1 second) until
the gateway exits short-term manual mode. The
display turns off.
Enabling permanent manual mode
The operation of the keyboard is programmed and
is not locked.
- Press the
key for at least 5 seconds.
The
LED is lit,
01
is displayed on the screen,
permanent manual mode is enabled.
or
- is displayed on the screen (refer to
bc
).
Disabling permanent manual mode
- Press the
key for at least 5 seconds.
The
LED turns off and bus mode is enabled.
Controlling the DALI participants
The gateway is in permanent or short-term manual
mode.
- Press briefly on the
key ( < 1 second) until the
number of the desired DALI participant is displayed
The
and
LEDs display the status.
- Control the DALI participant with the
key or
with the
key Short press : turns on and off
Long press : varies the light intensity brighter/
darker
The
and
LEDS display the status.
-
In permanent manual mode, after having
been through all the available DALI participant
Product description
The DALI TYA670W KNX gateway is used to interface
DALI lighting applications with the KNX system.
Function
System information
This device is a product of the KNX system and
complies with the KNX directives. Detailed technical
knowledge obtained in KNX training courses is a
prerequisite to proper undertsanding… The function
of this device depends upon the software. Detailed
information on loadable software and attainable
functionality as well as the software itself can be
obtained from the manufacturer's product
dartabase.
Planning, installation and commissioning of the
device are carried out with the aid of KNX-certified
software. Full functionality with KNX commissioning
software version ETS3.0f onwards.
An updated version of the product database,
technical descriptions and conversion programs
and other auxiliary programs are availbale on our
internet website.
Product characteristics
• Controls up to 64 DALI products in up to 32
groups
• Individual control, group control or general control
• Setting the color temperature for luminaires with
DALI operating device Type 8 for Tunable White in
accordance with IEC 62386-209
• 16 scenes
• Effect control for dynamic sequences and sets of
colours
• Reading of the status of DALI products via KNX,
e.g. light intensity, light fitting fault, etc.
• Manual control of DALI groups
• Priority
• Feedback on the status of switching and the
value of light intensity in bus mode and manual
mode
• General status feedback
• General command function
• Emergency lighting function
• Inhibition function for each group
• Separate switching and tripping delay
• Timer function with cut-off pre-warning
• Movement function : in combination with a
presence detector, reduction of the light intensity
when no movement is detected before turning off
• Online or offline commissioning of DALI products
with ETS plug-ins
• Surge protection and overload protection
• Possibility to replace an individual DALI product
without software during service
• Operating hours counter
• Delivery status : job-site mode, possibility of
ordering DALI groups using the keyboard. All
DALI products are ordered jointly.
• Signal of the global switching status of the DALI
devices, e.g. to switch off the mains voltage of
the DALI devices to avoid stanby losses.
:
.
?
n
B
6LE005270A
q
• Electrical equipment must be installed
and fitted by qualified electricians only.
• Failure to observe the instructions may
cause damage to the device and result
in fire or other hazards
•
This device is not suitable for
disconnection of the mains power
supply.
•
L'appareil ne convient pas pour la
déconnexion de l'alimentation du
réseau.
• The DALI control voltage is a functional
extra-low voltage (FELV). D u r i n g
the installation, ensure there is a safe
separation between KNX and DALI.
1
DALI
