ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120, User Manual

Page: 45 / 396

Chapter 3 Status Screens
NWA-3500/NWA-3550 User’s Guide
45
3.1.2 AP Statistics
Click the AP Statistics link the Status screen when the NWA is in AP controller
management mode.
Figure 15 Status > AP Statistics
The following table describes the labels in this screen.
Channel ID This is the channel ID number used by each wireless module on
the AP.
SSID List This is the SSID(s) currently used by each wireless module.
VLAN This is the VLAN ID of each SSID in use. It shows - if the SSID
does not use VLAN.
Stations This is the number of the wireless clients currently associated to
each wireless module.
Refresh Click this button to update the screen statistics immediately.
Table 5 Status > AP List
LABEL DESCRIPTION
Table 6 Status > AP Statistics
LABEL DESCRIPTION
AP Description This is the descriptive name configured for this AP in the
Controller > AP Lists .
802.11 Mode This is the wireless standard supported by each wireless module
on the AP.
Channel ID This is the channel ID number used by each wireless module on
the AP.
Rx PKT This is the number of received packets on this AP.
Tx PKT This is the number of transmitted packets on this port.
Rx FCS Error Count This is the number of received packets with the Frame Check
Sequence (FCS) error(s).
Tx Retry Count This is the number of times for the NWA to resend the packets
Automatic Refresh
Interval Select a number of seconds or None from the drop-down list box
to update all screen statistics automatically at the end of every
time interval or to not update the screen statistics.
Refresh Click this button to update the screen statistics immediately.
Reset