ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 User Manual Download Page 33

Page: 33 / 396

Chapter 1 Introducing the NWA

NWA-3500/NWA-3550 User’s Guide

WDS/SYS

Green

The NWA is in AP + Bridge or Bridge/
Repeater mode, and has successfully
established a Wireless Distribution System
(WDS) connection.

Red

Flashing

The NWA is starting up.

Off

Either

The NWA is in Access Point or MBSSID mode
and is functioning normally.

The NWA is in AP + Bridge or Bridge/
Repeater mode and has not established a
Wireless Distribution System (WDS)
connection.

The NWA is not receiving power.

WL2

Green

The wireless adaptor WLAN2 is active.

Blinking

The wireless adaptor WLAN2 is active, and
transmitting or receiving data.

Off

The wireless adaptor WLAN2 is not active.

ZyAIR

Blue

The NWA is receiving power.

You can turn the ZyAIR LED off and on using
the Web configurator. See

Section 8.4 on

page 123

Blinking

The NWA is receiving power and transmitting
data to or receiving data from its wireless
stations.

Off

Either

The NWA is not receiving power.

The ZyAIR LED has been disabled. See

Section 8.4 on page 123

for how to enable

the ZyAIR LED.

ETHERNET Green

The NWA has a 10 Mbps Ethernet
connection.

Blinking

The NWA has a 10 Mbps Ethernet connection
and is sending or receiving data.

Yellow

The NWA has a 100 Mbps Ethernet
connection.

Blinking

The NWA has a 100 Mbps Ethernet
connection and is sending/receiving data.

Off

The NWA does not have an Ethernet
connection.

Table 3

LEDs (continued)

LABEL LED

COLOR

STATUS

DESCRIPTION

Summary of Contents for 802.11a/g Wireless CardBus Card ZyXEL AG-120













































































































































































































































































































































































































Search results

Summary of Contents for 802.11a/g Wireless CardBus Card ZyXEL AG-120

Reviews:

Related manuals for 802.11a/g Wireless CardBus Card ZyXEL AG-120

Brands by name

Popular brands

ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120, User Manual

Search results

Summary of Contents for 802.11a/g Wireless CardBus Card ZyXEL AG-120

Reviews:

Related manuals for 802.11a/g Wireless CardBus Card ZyXEL AG-120

Brands by name

Popular brands