ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120, User Manual

Page: 234 / 396

Chapter 19 Log Screens
NWA-3500/NWA-3550 User’s Guide
234
Use
sys logs category
followed by a log category and a parameter to decide what to
record
Use the
sys logs save
command to store the settings in the NWA (you must do this in
order to record logs).
19.6.4 Displaying Logs
Use the
sys logs display
command to show all of the logs in the NWA’s log.
Use the
sys logs category display
command to show the log settings for all of the log
categories.
Use the
sys logs display [log category]
command to show the logs in an individual
NWA log category.
Use the
sys logs clear
command to erase all of the NWA’s logs.
19.6.5 Log Command Example
This example shows how to set the NWA to record the error logs and alerts and
then view the results.
Table 78 Log Categories and Available Settings
LOG CATEGORIES AVAILABLE PARAMETERS
error 0, 1, 2, 3
mten 0, 1
Use
0
to not record logs for that category,
1
to record only logs for that category,
2
to
record only alerts for that category, and
3
to record both logs and alerts for that category.
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
#. time source destination notes
message
0 | 11/11/2002 15:10:12 | 172.22.3.80:137 | 172.22.255.255:137 | ACCESS
BLOCK