ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120, User Manual

Page: 197 / 396

Chapter 16 Remote Management Screens
NWA-3500/NWA-3550 User’s Guide
197
Some traps include an SNMP interface index. The following table maps the SNMP
interface indexes to the NWA’s physical and virtual ports.
authenticationFailure
(defined in
RFC-1215 )
1.3.6.1.6.3.1.1.5.5 The device sends this trap when it
receives any SNMP get or set
requirements with the wrong community
(password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214
and RFC 1907) must be enabled on in
order for the device to send
authenticationFailure traps. Use a MIB
browser to enable or disable
snmpEnableAuthenTraps.
Traps defined in the
ZyXEL Private MIB.
whyReboot
1.3.6.1.4.1.890.1.5.1
3.0.1 This trap is sent with the reason for
restarting before the system reboots
(warm start).
"System reboot by user!" is added for an
intentional reboot (for example,
download new files, CI command "sys
reboot").
If the system reboots because of fatal
errors, a code for the error is listed.
pwTFTPStatus 1.3.6.1.4.1.890.1.9.2.
3.3.1 This trap is sent to indicate the status
and result of a TFTP client session that
has ended.
Table 62 SNMP Interface Index to Physical and Virtual Port Mapping
TYPE INTERFACE PORT
Physical enet0 Wireless LAN adaptor
WLAN1
enet1 Ethernet port (LAN)
enet2 Wireless LAN adaptor
WLAN2
Virtual enet3 ~ enet9 WLAN1 in MBSSID mode
enet10 ~ enet16 WLAN2 in MBSSID mode
enet17 ~ enet21 WLAN1 in WDS mode
enet22 ~ enet26 WLAN2 in WDS mode
Table 61 SNMP Traps
TRAP NAME
OBJECT IDENTIFIER #
(OID)
DESCRIPTION