PG 23
ZYTRONIC PROJECTED CAPACITIVE ZXY100/110
®
TOUCH CONTROLLER & SENSOR
INTEGRATION MANUAL
ISSUE 1
ZYTRONIC
FIGURE 22
USB CABLE HELD IN PLACE
Adding cable clips similar to those shown in Figure 23 will reduce the risk of damage
occurring to the controller PCB connector if the cable is accidentally pulled. If adhesive pads
are used on the clips, it must be ensured that they will maintain their adhesion at any
temperature that they may be subjected to in service.
FIGURE 23
CABLE CLIPS HOLDING CABLE IN PLACE
The LCD video and power connections should be connected to the LCD, as shown in
Figure 24, and to the PC and power sockets.
Summary of Contents for ZXY100
