Zytronic ZXY100, Integration Manual

Page: 14 / 41

PG 14 ZYTRONIC PROJECTED CAPACITIVE ZXY100/110
®
TOUCH CONTROLLER & SENSOR INTEGRATION MANUAL ISSUE 1
ZYTRONIC
INTEGRATING THE CONTROLLER PCB
The components on the rear of the LCD should be arranged to allow a suitable space for the
controller PCB, as shown in Figure 9.
FIGURE 9 REAR OF LCD READY FOR CONTROLLER MOUNTING
The controller PCB should be positioned so that the flexible cable(s) can reach their
respective ZIF socket(s) without crossing over other cables or PCBs. There should also be
sufficient space around the USB socket to attach the cable. Ideally avoid placing the
controller within ~30mm of other PCBs and cables, as shown in Figure 10.
FIGURE 10 CONTROLLER POSITION ON REAR OF LCD