Zypcom Z34-PC, User Manual

Page: 73 / 132

3-29
3
\Qn (Serial Port
Flow Control)
Specifies the DTE-to-modem flow control. Software flow
control uses the XOFF command to stop and the XON
characters to start data transmission, both to and from
the DTE. Unidirectional hardware flow control uses the
CTS control line to stop or start data from the DTE only,
while bidirectional hardware flow control also uses the
RTS control to stop or start data from the modem.
C
OMMAND
D
ESCRIPTION
\Q0 Disables flow control.
\Q1 XON/XOFF software flow control
\Q2 Unidirectional hardware flow control
\Q3* Bidirectional hardware flow control
\Tnn (Inactivity
timer)
Is measured in minutes and has a range of from 0
(disable timer) to 90 minutes. If \T1 to \T90 is selected
and there is no receive or transmit data for that period,
then the modem will hang-up the connection.
C
OMMAND
D
ESCRIPTION
\T0* Disable timer
\T1-90 Length in minutes
\U (Accept Reliable
Link)
Issue this command when you need the modem to go to
an MNP error controlled connection from a non-error
controlled connection. This command works in
conjunction \O which is for the originate side.