Zypcom Z34-PC, User Manual

Page: 67 / 132

3-23
3
modem always responds to any rate change initiated by
the remote modem.
C
OMMAND
D
ESCRIPTION
%G0 Disabled
%G1* Enabled
-Cn (Generate Data
Calling Tone)
Allows the DTE to select whether the modem sends a
1300-Hz calling tone or V.8 calling tone when
originating a data modem connection.
C
OMMAND
D
ESCRIPTION
-C0* Calling tone disabled.
-C1 1300-Hz calling tone enabled.
-C2 V.8 calling tone and 1300-Hz calling tone
+MS=m (Modulation
Control)
The +MS command controls the modulation used on a
connection. It also controls whether or not automode is
used, as well as the maximum and minimum carrier
data rates (line speed) on the connection. Default is
+MS=Vx2, 1, 300, 0;B1
+MS=<carrier>,<automode>,<min rate>, <max rate>;Bn
Valid carrier parameters are: Vx2, V34B, V34BS, V34,
V34S, V32B, V32, V22B, V22C, V22, V21.
V34BS and V34S parameters set symmetrical line rates
for both transmit and receive. V34B and V34 allow for
asymmetrical data rates on transmit and receive. Vx2
is for 53,333 to 33,333 on receive side and 31,200 to
4800 on transmit side. V34B or V34BS is for 33600 to