ZP302 User Manual
41
Digital Map Configuration
Field name
explanation
End with "#"
Set Enable/Disable the phone ended with “#” dial.
Fixed Length
Specify the Fixed Length of phone ending with.
Time out
Set the timeout of the last dial digit. The call will be sent after
timeout.
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas,
or a list of digits.
x Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
Tn Indicates an additional time out period before digits are sent of n seconds in length. n is
mandatory and can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial
plan. If Tn is not specified it is assumed to be T0 by default on all dial plans.
[1-8]xxx:
Cause extensions 1000-8999 to be dialed immediately
9xxxxxxx:
Cause 8 digit numbers started with 9 to be dialed immediately
911: Cause 911 to be dialed immediately after it is entered.
99T4:
Cause 99 to be dialed after 4 seconds.
9911x.T4:
Cause any number started with 9911 to be dialed 4 seconds after dialing ceases.
Notice:
End with “#”, Fixed Length, Time out and Digital Map Table can be used
simultaneously, System will stop dialing and send number according to your set rules.
4.3.4.4. Phone Book
