Zycoo ZP302 User Manual Download Page 28

Page: 28 / 55

ZP302 User Manual

VLAN ID Check Enable

Enable VLAN ID check by selecting it. After enable VLAN ID

check, if VLAN ID of a data package is not the same with the

phone’s or a data package do not have VLAN ID, the data package

will be discarded.

Voice/Data VLAN

differentiated

After enable VLAN, system will set packets with different type of

VLAN ID. Undifferentiated means after using VLAN, both VoIP

packets and other data packets will use the voice VLAN ID; tag

differentiated means after using VLAN, VoIP(signal and voice)

packets will add voice VLAN ID, and other data packets will add

data VLAN ID; data untaged means after using VLAN, only VoIP

packets will add voice VLAN ID. Other data packets will not use

VLAN.

DiffServ Enable

Select it or not to Enable or disable DiffServ.

DiffServ Value

Set DiffServ value, the common value is 0x00.

Voice 802.1P Priority

Specify 802.1P Priority of voice/signal data package.

Data 802.1P Priority

Set 802.1p of data VLAN. Non-VoIP data (such as http, telnet, ping

etc) will use this value to set VLAN package.

Voice VLAN ID

Set VLAN ID of voice/signal data package.

Data VLAN ID

Set 802.1q of data VLAN ID. Non-VoIP data (such as http, telnet,

ping etc) will use this value to set VLAN package.

NOTICE

：

）

Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will

use the Voice VLAN ID as the tag.

2) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disable the

DiffServ, then system will not distinguish the voice and data, all packets will use the Voice

VLAN ID as the tag.

3) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enable the

DiffServ, then system will distinguish the voice and data and add the VLAN ID each other.

4) Startup VLAN, if set Voice/Data VLAN differentiated as data untaged, then the packet of the

signal/voice will use the Voice VLAN ID as the tag, but the data packets will not take the

VLAN tag.

5) If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all

packets will not take the VLAN tag; If enable the DiffServ, all packets will only take the

DiffServ value.

6) user need notice, enable the VLAN ID Check Enable that is default, If enable it, the phone

will match the VLAN ID strictly. When others' VLAN ID dismatch with us, the packets will

discard. Contrarily, the phone will accept the packets with the distinct VLAN ID.

7) You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP

in the VLAN and also can not dial with point to point.

4.3.2.3. Service Port

You can set the port of telnet/HTTP/RTP by this page.

Summary of Contents for ZP302
























































Search results

Summary of Contents for ZP302

Reviews:

Related manuals for ZP302

Brands by name

Popular brands

Zycoo ZP302, User Manual

Search results

Summary of Contents for ZP302

Reviews:

Related manuals for ZP302

Brands by name

Popular brands