Zundapp Green 1.0 Operating Manual Download Page 7

Page: 7 / 81

Operating Manual – Folding bike with electric drive up to 250 W

04.02.2022 REV 2.1

Unpacking and assembly

I M P O R T A N T

The first charge is crucial!

Please fully charge the battery before using the bike for the

first time!

Dear Customer, Please note that your bike is delivered to you 98% pre-assembled. As a rule, the fol-
lowing activities remain to be carried by you after unpacking the bike:

Inspect the stem (see: 11 Assembling components of the bike / Checking the stem on p. 33)

Adjust the handlebars (see: 11 Assembling components of the bike / Handlebar adjustment
on p. 33)

Adjust the saddle (see: 11 Assembling components of the bike / Fitting the pedals on p. 37)

Attach the pedals or check that the pedals are securely attached (see: 11 Assembling compo-
nents of the bike / Fitting the pedals on p. 37)

Check the proper function of all the brakes (see: 13 Using the bike / Actuating the brakes on
p. 43)

Check the function of the derailleur (see: 13 Using the bike / Operating the gears on p. 44)

Charge the battery (see: 12 Before riding the bike for the first time / Charging the battery on
p. 39)

An informative and practical assembly video can be found under the following QR code:

Summary of Contents for Green 1.0


















































































Search results

Summary of Contents for Green 1.0

Reviews:

Related manuals for Green 1.0

Brands by name

Popular brands

Zundapp Green 1.0, Operating Manual

Search results

Summary of Contents for Green 1.0

Reviews:

Related manuals for Green 1.0

Brands by name

Popular brands