manualshive.com logo in svg

Zundapp Green 1.0, Operating Manual

Share
Download
Zundapp Green 1.0 Operating Manual Download Page 19

Operating Manual – Folding bike with electric drive up to 250 W 

 

 

04.02.2022     REV 2.1

 

19

 

 

 

Avoid serious injuries or death caused by damaged, bent or loose reflectors and lights 

Bike reflectors catch the light from street lamps and car headlights and reflect it so that you can be 
recognised as a cyclist. Damaged, bent or loose reflectors can result in you being poorly recognised 
by other road users. This may cause serious injuries or even death. 

-

 

Check your reflectors and their secure attachment at regular intervals. 

-

 

Have damaged, bent or loose reflectors replaced by your dealer. 

 

Avoid serious injuries caused by riding off-road or over kerbs 

 

C A U T I O N 

 

 
 
 

Risk of falling when riding on uneven terrain! 

 
 

 

 

Riding off-road or over kerbs at inappropriate speeds can cause you to fall. This may cause serious 
injury or even death. 

-

 

Always ride at a speed appropriate to the riding conditions. 

 

Avoid serious injuries or death due to replacing components or adding accessories 

Numerous components and accessories are available that can improve the comfort, performance 
and appearance of your bike. You add components or accessories at your own risk. It is possible that 
these components or accessories have not been tested for compatibility, reliability or safety by the 
bike manufacturer. Unconfirmed compatibility, reliability or safety and improper installation, use and 
maintenance of bike components or accessories can lead to serious injuries or even death. 

-

 

Always consult your dealer before installing, using and maintaining the component. 

-

 

Always read and follow the instructions for use supplied with the accessories. 

 

Avoid serious injury due to inadequate maintenance, cleaning and care 

Improper maintenance, care and cleaning can result in injuries or even death. 

-

 

Carry out only the activities listed in the maintenance plan. 

-

 

Use only use commercially available lubricants and 
cleaning agents. 

-

 

Have other maintenance work and repairs carried out 
by a qualified dealer. 

 

 

Summary of Contents for Green 1.0


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands