Zünd L-1200, Operating Manual

Page: 77 / 142

PN series frame version Controls and operation
Command description
4-29
110006,001,11-2009, jmu
4
Possible inputs: 0, 1, 2, 3, 4
Tool number:
– Enter using the arrow keys (left/right) or the numeric keypad.
– Confirm with the ENT key.
– Save as a configuration parameter, if required.
JETPLOT (227) No function.
LINK TO TOOL (2271) No function.
SPEC. PENPULS (228) This command increases the pen pulse if a type TP or TPT tool head with increased
drawing pen stroke is installed.
LINK TO TOOL (2281) The tool number for the increased pen pulse is specified here.
Possible inputs: 0, 1, 2, 3, 4
Tool number:
– Enter using the arrow keys (left/right) or the numeric keypad.
– Confirm with the ENT key.
– Save as a user parameter, if required.
DISTANCE COUNTER
(229)
This command monitors and measures the distance covered by a lowered tool.
For a long-life ballpoint, a drawing performance of 30km is entered, for example. Af
-
ter 30km drawing distance, the machine stops automatically and displays a cor
-
responding message.
LINK TO TOOL (2291) The tool number to be monitored is specified here.
Possible inputs: 0, 1, 2, 3, 4
Tool number:
– Enter using the arrow keys (left/right) or the numeric keypad.
– Confirm with the ENT key.
– Save as a configuration parameter, if required.
ACTUAL (2292) If a used tool (ballpoint etc.) is inserted, the distance already covered can be entered
here.
The distance is saved directly after pressing the ENT key.
MAXIMUM (2293) The maximum tool life expectancy can be entered here.
The tool life is saved directly after pressing the ENT key.
DRT (231) The following settings relate to the driven rotary tool - hereafter referred to as "DRT".
DELAY (2311) Sets the delay parameter for the tool's downward movement.
LINK TO TOOL (2312) Parameters are scaled in 1/10 seconds.
The tool module into which the DRT is inserted is defined here.
Possible inputs: 0,1,2,3,4
Tool number:
– Enter using the (left/right) arrow keys or the numeric keypad.
– Confirm with the ENT key.
– Save as a configuration parameter, if required.