Zünd L-1200, Operating Manual

Page: 61 / 142

PN series frame version Controls and operation
Command menu
4-13
110006,001,11-2009, jmu
4
4.4.2 Menu structure
The menu is structured in tree form. Related and similar functions are combined to
form groups.
The basic level contains five groups:
Job setup
Settings for the JOB (configuration); e.g. speed, deceleration, initialisation.
Tool
Selection of tools
Functions
Functions such as cutting, clearing the buffer, replot mode.
Users
Functions such as cutting, clearing the buffer, replot mode.
Basic settings
Calling up and storing presettings.
4.4.3 Operation
The basic level of the menu tree is called using the ESC key.
There are two possibilities for navigating within this menu tree:
The cursor within the display of the operating panel can be
– Moved line by line using the Up/Down arrow key
– Moved page by page using the Left/Right key.
The display shows the corresponding submenu.
Once the cursor has been placed on the entry, you can select it using the ENT key.
Instead of using the arrow keys, the number of a submenu or command can be
entered directly using the number keys. Subsequently, the display shows the cor
-
responding submenu.
Arrangement of submenus
On the lowest levels, the submenus show functions, numbers inputs or selection pos
-
sibilities.
Commands
Commands are executed as soon as they are selected using the ENT key or using
the corresponding command number.
The operation can be terminated using the ESC key.