Zumtobel LUXMATE CIRIA, Instructions For Start-Up And Use

Page: 108 / 142

Commissioning the field level
LM-CIRIA operating and commissioning manual 2.0 | 06. 2012 | en 108
Setting the fade speed and assigning a building service type
Figure 169: FADE - TYPE settings level
– Start point: FADE - TYPE settings level
1. Select FADE .
= FADE illuminates.
2. Run your finger along the touchring until the desired number appears.
3. Select TYPE .
= TYPE illuminates.
4. Run your finger along the touchring until the desired setting appears.
5. Select SAVE to save the settings.
= The message SAVED briefly appears.
= Fade speed and building service type are saved.
= ROOM - GROUP settings level appears.
Notes
•
Settings are only saved if SAVE is selected.
• Selecting SAVE automatically saves all values displayed on the touchscreen.
• To switch to the WAITING TIME settings level directly (without saving), select NEXT STEP .
FADE parameter Value range (in seconds) Factory setting
FADE 0, 1, 3, 5, 7, 10, 15, 30, 60 0 seconds
Table 66:
FADE
setting options
Building service type Building service type number
COMMON (all building services) 1
Brightness 2
Blind position 3
Slat angle 4
Screen 10
Colour temperature 13
Window 65
Curtain 64
Temperature 11
Air exchange 39
Table 67: Selection of TYPE setting options