10
3.4 Assembly of microscope head
Take out microscope head from the packing, tighten with M4 socket hexagon screw.
3.5 Assembly of 190º inclinable binocular
Take out the 190º inclinable binocular from the package, fix it to the microscope head ,
make sure the pin is in the right position, then tighten the screw [10]
。
3.6 Assembly of handle
Manipulating handle [26] is fixed on the lower part of microscope, Handle angle can be
adjusted as you needed.
3.7 Assembly of the LED power cable
The LED power cable is fixed on the first and second arm. Plug LED power cable into the
joint [28].
3.8 How to connect the power cable
Take out the power cable and plug it into the power socket [22]
on the base of the
microscope.
3.9 built-in camera connection
Insert the built-in camera cable on the connector [29].
3.10 video output connection
The video output cable is plugged into HDMI interface [20] on the base of the
microscope and the other end is connected to the monitor connector.
Caution
：
The terminals of LED power cable must be plugged in the right holes of the
joint.
Fig.8 Assembly of microscope head
M4
