8 Care and maintenance
8.6
Cleaning the door seal
▸ Clean the door seal with a soft cloth dampened with water, but do not use any clean-
ing agent.
▸ Dry with a soft cloth.
8.7
Replacing the door seal
The door seal cannot be removed. For safety reasons, the door seal must be re-
placed by our Customer Services.
8.8
Replacing the halogen light bulb
WARNING: Risk of electric shock!
Disconnect the appliance from the mains power supply before replacing the halo-
gen light bulb.
Risk of burns from hot surfaces!
Allow the halogen light bulb and the appliance to cool down before replacing the
halogen light bulb.
Do not touch the halogen light bulb with bare hands. Instead, use a fine, dry,
grease-free cloth.
Failure to fit the glass light cover and seals properly may cause a malfunction or
damage to the appliance. Any defective parts, especially seals that have become
brittle, must be replaced with original spare parts. If you are unsure, please contact
Customer Services.
Overhead illumination
▸ Carefully unscrew the glass light cover
1
anti-
clockwise and remove together with the seals
and the metal ring.
▸ Take out the faulty halogen light bulb.
▸ Carefully plug the new halogen light bulb into
the socket – halogen type G9 / 25 W / 230 V.
▸ Turning clockwise, screw back in place the
glass light cover together with the seals and
the metal ring.
–
Ensure that the seals are not kinked.
▸ Switch the power supply back on.
1
54
Summary of Contents for CombairSteamer V2000
Page 70: ...70 15 Notes...
