32
Error indication
Cause
Remedy
H-01
Abort: Heating system error
the oven does not heat up.
- please contact your for oven service dealer or
service company.
- Replace heating spiral
- Exchange the power relay for the heating
V-01
Abort: Vacuum error
the vacuum level is not
increasing
- check whether the vacuum hose is the pump and
the power cord for the pump connected to the
furnace and the pump
- check whether the sealing ring of the combustion
chamber and lift plate are clean
- carry out a vacuum test (see page 28) if the va-
cuum pump fails starts please check the fine-wire
fuse on the vacuum pump (small fuse compart-
ment below the power connector on the vacuum
pump, a fuse is active here 2nd fuse is provided
as a spare)
- all the points mentioned do not lead to success,
please contact your service partner
4. Status messages
