Zte ZXMBW E9200, User Manual, Page: 29 / 63

Chapter 1 Error! Style not defined.
Confidential and Proprietary Information of ZTE CORPORATION 15
Field Description
TLVs A triplet following the message head.
Figure 10 illustrates the detailed format of the flag field
.
F
I G U R E
1 0 F
L A G
F
I E L D S
F
O R M A T
T r r r r r r R
Table 10 Flag Fields and Description lists the flag fields and
their description.
T
A B L E
1 0 F
L A G
F
I E L D S A N D
D
E S C R I P T I O N
Bit Description
r
Reserved bit that must be set to 0. The receiver
should ignore the reserved bit.
T
If this bit is configured, the message should contain
Source Identifier TLV and Destination Identifier TLV.
R Used to reset the next expected Transaction ID.
Figure 11 illustrates the structure control plane protocol stack.
F
I G U R E
1 1 C
O N T R O L
P
L A N E
P
R O T O C O L
S
T A C K
IP
UDP
Control
Message
L2 Connectivity
A logical connectivity between L2 of two control plane protocol
stack enables communications between the two functional
entities. The encapsulation of IP packets between the two
functional entities relies on the connectivity type, e.g. GRE
tunnel. The seal of the encapsulated packet contains address
information, which ensures that the packet can be sent to the
correct physical entity.
The physical layer of the R6 interface supports packet access
and Time Division Multiplexing (TDM) access.

Packet access: 100MBps FE electrical port

TDM access: E1/T1, E3/T3 electrical port, OC-3 optical port.
Control Plane
Protocol Stack
Physical Layer