Zte ZXMBW E9200, User Manual, Page: 22 / 63

ZXMBW E9200 Indoor Pico Base Station User Manual
8 Confidential and Proprietary Information of ZTE CORPORATION
Index Description
Frequency
band range
It supports the band range from 2496MHz
to 2690MHz.
Carrier
bandwidth 10MHz (configurable)
RF grid 250KHz
RF
Noise
coefficient < 6
Duplex
mode FDD/TDD It supports TDD.
Carrier
sector 1CS
MIMO It supports 2 x 2 MIMO.
System
indexes
Output
power of
antenna
port
2×500mW
Modulation mode QPSK,16QAM,64QAM
Demand for antenna
omni-directional or directional
R6 interface
It supports 10M /100M Ethernet electrical
interfaces.
It supports remote upgrading.
Maintenance
It supports local OMC and Debug interfaces.
Environmental
protection
It meets the Restriction of Injurious
Materials in Electric and Electronic Devices
of European Union ROHS and WEEE
regulations.
Air cooling Self-cooling and no fan available.
Followed standards
IEEE 802.16-2005; WiMAX ForumTM Mobile
Radio Conformance Tests
Lightning protection
It supports level D internal lightning
protection power.
Installation mode Indoor: wall-mounted and pole-held
It meets the FCC and UL authentications.
Authentication
It meets the CE authentication.

GPS clock
The precision of the system output clock PP1S is not less
than 1E-10 when the GPS is locked. It is not less than 5E-10
during free oscillation.

ToP clock
The ToP over Ethernet clock allows master/slave
configuration. The duration when the slave clock is locked to
Clock Index