Zte ZXC10 BTSB I1, Installation Manual

Page: 110 / 227

ZXC10 BTSB (V1.0) cdma2000 Base Transceiver Station Installation Manual
9-4
with End B3 of the RFS external monitoring cable. The DB9 female connector at End
B is connected to the sensor.
The terminal connection of the cable connector is described in Table 9.2-2.
Pin No. sequence of DB9
male connector at End A
1
6
9 5
End A
Label
End B
Pin No. sequence of DB9
male connector at End B
1
5
6
9
Label
L= 10 m
(a)
(b)
Fig. 9.2-2 Installation of Temperature-Humidity Converter
Table 9.2-2 Terminal Connection of the Temperature/Humidity Sensor Cable Connector
Signal Definitions Pin No. at End A Cable Color Pin No. at End B
HUM 1 White 3
TEMP 7 Blue 4
GND 3 White 1
+5V 8 Orange 5
6 Shielded cable
9.2.3 Installing the Infrared Sensor
9.2.3.1 Installation Position
The infrared sensor should be installed on the upper part of a corner in the equipment
room, so that it can detect the persons entering the equipment room through the door or
window. The installation location of the infrared sensor is shown in Fig. 9.2-3.