Zte ZXC10 BTSB I1, Installation Manual

Page: 94 / 227

ZXC10 BTSB (V1.0) cdma2000 Base Transceiver Station Installation Manual
7-18
A
B
Fig. 7.4-1 Interconnection Cables between BDS and RFS Cabinets
7.4.2 Installing Optical Fibers
The clock signals and other interconnection signals between BDS and the remote RFS
cabinet are transmitted through the optical fibers. There are four pairs of active/standby
optical fibers. The optical interface connecting the BDS and RFS cabinets are LC
connectors, which is connected through the optical fiber connector box. For the
connection relationship, see the following Table 7.4-1.
Table 7.4-1 Optical Fiber Connection between BDS and RFS
Sequence
No.
Cable Component
Name
End A Direction End B Direction
1 LC/PC-LC/PC BDS-S11-BIM6_OPT0_TX RFS-Cabinet top-OPT0_RX
2 LC/PC-LC/PC BDS-S11-BIM6_OPT0_RX RFS-Cabinet top-OPT0_TX
3 LC/PC-LC/PC BDS-S11-BIM6_OPT1_TX RFS-Cabinet top-OPT1_RX
4 LC/PC-LC/PC BDS-S11-BIM6_OPT1_RX RFS-Cabinet top-OPT1_TX
5 LC/PC-LC/PC BDS-10-BIM6_OPT0_TX RFS-Cabinet top-OPT2_RX
6 LC/PC-LC/PC BDS-S10-BIM6_OPT0_RX RFS-Cabinet top-OPT2_TX
7 LC/PC-LC/PC BDS-S10-BIM6_OPT1_TX RFS-Cabinet top-OPT3_RX
8 LC/PC-LC/PC BDS-S10-BIM6_OPT1_RX RFS-Cabinet top-OPT3_TX
7.4.3 Installing Interconnection Cables with BPWS
The cables for interconnecting with the BPWS cabinet have the DE9-core connector at
the two ends. If BDS cabinets exist, connect BDS with BPWS, while if there is no BDS
at the local end, connect the DE9-core socket on the top of the RFS cabinet to BPWS.
See Table 7.4-2 for the specific signal connection relation.